Reassembly And Remounting - Suzuki RV125 Service Manual

5-24 CHASSIS

REASSEMBLY AND REMOUNTING

Reassemble and remount the front fork in the reverse order of
removal and disassembly. Pay attention to the following points:
!
* Thoroughly wash all the component parts being
assembled.
* When reassembling the front fork, use new fork oil.
* Use the specified fork oil for the front fork.
* When reassembling, replace the oil seal, dust seal
and damper rod bolt gasket with new ones.
• Insert the oil lock piece 1 into the inner tube and install the
oil seal 2.
NOTE:
Apply grease to the oil seal 2 lip lightly before installing it.
% 99000-25010: SUZUKI SUPER GREASE "A"
NOTE:
* When installing the oil lock piece, insert the tapered end A of
oil lock piece into the inner tube.
* When inserting the inner tube into the outer tube, take care not
to come off the oil lock piece from the inner tube.
OIL SEAL
• Apply fork oil to the lip of the oil seal 1 and install it into the
outer tube using the front fork oil seal installer.
" " 09940-52861: Front fork oil seal installer set " "
!
Wash clean the front fork oil seal installer before
using. If dirt is on the installer, the inner tube may pos-
sibly be damaged during press-fitting work.