3-64
ENGINE
CAM CHAIN TENSION ADJUSTER
Install the cam chain tension adjuster. Pay attention to the fol-
lowing points:
• Apply engine oil to the push rod.
• Turn the adjusting screw clockwise with a flat-bladed screw
driver until the push rod locked.
• Fit a new gasket to the cam chain tension adjuster body.
"
Use a new gasket to prevent oil leakage.
• Install the cam chain tension adjuster body to the cylinder and
tighten the bolts to the specified torque.
# Cam chain tension adjuster bolt: 7 N·m (0.7 kgf-m)
• Turn the adjusting screw counterclockwise with a flat-bladed
screw driver to unlock.
• Install the rubber cap.