Inspection - Suzuki RV125 Service Manual

• Remove the steering stem lower bearing C.
• Remove the ignition switch D using the special tools.
" 09930-11920: Torx bit JT40H
09930-11940: Bit holder

INSPECTION

Inspect the removed parts for the following abnormalities. If any
damages are found, replace the respective parts with the new
ones.
* Steering race wear and brinelling
* Bearing wear or damage
* Abnormal bearing noise
* Distortion of steering stem or handlebars
• Remove the steering stem lower inner race, use a chisel.
!
* Unless corrosion, damage or other abnormal condi-
tion is found, the bearing race need not be replaced.
* Once the lower inner race has been removed,
replace it with a new one.
• Drive out the steering stem upper and lower bearing races by
using the special tools.
" 09941-54911: Bearing outer race remover
09941-74911: Steering bearing remover
CHASSIS 5-31