Rear Brake Pedal Removal - Suzuki RV125 Service Manual

5-40 CHASSIS
• Install the brake shoes with spring hooks faced inside.
!
Be careful not to apply too much grease to the cam
and pin. If grease gets on the lining, brake slippage
will result.
• When installing the brake cam lever, align the groove A of
camshaft with slit of cam lever.
• Tighten the brake cam lever nut to the specified torque.
' Brake cam lever nut: 7 N·m (0.7 kgf-m)
• Install the rear wheel. (#5-37)

REAR BRAKE PEDAL REMOVAL

• Remove the rear brake adjuster nut 1, pin 2, spring 3 and
washer 4.
• Remove the rear brake light switch spring 5.
• Remove the brake pedal return spring 6.
• Remove the snap ring 7.
• Remove the brake pedal.