Suzuki RV125 Service Manual page 124

5-8 CHASSIS
SPEEDOMETER GEARBOX
• Apply SUZUKI SUPER GREASE to the speedometer gear-
box.
! 99000-25010: SUZUKI SUPER GREASE "A" ! ! !
• Align the lugs 1 on the speedometer gearbox with the
recesses 2 on the front wheel.
FRONT WHEEL
• Make sure that the stopper 3 on the front fork and the speed-
ometer gearbox protrusion 4 are installed as shown.
"
When installing the front wheel, position the brake
disc between the brake pads. Be careful not to dam-
age the brake pads.
• Tighten the front axle to the specified torque.
• Tighten the front axle pinch bolt 5 to the specified torque.
# 09900-18710: Hexagon socket (12 mm) #
# #
$ Front axle: 65 N·m (6.5 kgf-m)
Front axle pinch bolt: 23 N·m (2.3 kgf-m)
NOTE:
* Before tightening the front axle pinch bolt 5, move the front
fork up and down four or five times.
* After remounting the front wheel, pump the brake lever a few
times to check for proper brake operation.