Suzuki RV125 Service Manual page 83

DRIVESHAFT BEARING INSTALLATION
• Install the driveshaft bearings using the special tool.
% 09913-70210: Bearing installer set
• Install the washer 1.
• Apply a small quantity of SUZUKI SUPER GREASE to the lip
of the oil seal.
( 99000-25010: SUZUKI SUPER GREASE "A"
• Install the oil seal using the special tool.
% 09913-70210: Bearing installer set
• Install the bearing retainer 2.
NOTE:
Apply a small quantity of THREAD LOCK to the bearing retainer
screws.
* 99000-32050: THREAD LOCK "1342"
COUNTERSHAFT BEARING INSTALLATION
• Install the countershaft bearings with the special tools.
% 09913-70210: Bearing installer set
• Install the bearing retainer 3.
NOTE:
Apply a small quantity of THREAD LOCK to the bearing retainer
screws.
* 99000-32050: THREAD LOCK "1342"
ENGINE 3-47