Table of Contents
Advertisement
Chapter 3
Basic Cisco SCE 8000 Platform Operations
How to Display the Cisco SCE Platform Inventory
Unique Device Identification (UDI) is a Cisco baseline feature that is supported by all Cisco platforms.
This feature allows network administrators to remotely manage the assets in their network by tracing
specific devices through either CLI or SNMP. The user can display inventory information for a remote
device via either:
•
•
•
The show inventory CLI commands display the following information:
•
•
•
•
•
From the SCE> prompt, type:
Command
show inventory [raw]
Examples for Displaying the Cisco SCE Platform Inventory
•
•
Displaying the Cisco SCE Platform Inventory: FRUs Only
The following example shows how to display the inventory (UDIs) for the FRUs only:
SCE> show inventory
NAME: "SCE8000 Chassis", DESCR: "CISCO7604"
PID: CISCO7604
NAME: "SCE8000 Service Control Module (SCM) in slot 1", DESCR: "SCE8000-SCM-E"
PID: SCE8000-SCM-E
NAME: "SCE8000 SPA Interface Processor (SIP) in slot 3", DESCR: "SCE8000-SIP"
PID: SCE8000-SIP
NAME: "SPA-1X10GE-L-V2", DESCR: "SPA-1X10GE-L-V2"
PID: SPA-1X10GE-L-V2
NAME: "SPA-1X10GE-L-V2", DESCR: "SPA-1X10GE-L-V2"
PID: SPA-1X10GE-L-V2
NAME: "SPA-1X10GE-L-V2", DESCR: "SPA-1X10GE-L-V2"
OL-30621-02
Entity MIB (see ENTITY-MIB)
CLI show inventory command
This command displays the UDIs only for field replaceable units (FRU).
CLI show inventory raw command.
This command displays all UDIs on the Cisco SCE 8000 platform.
Device name
Description
Product identifier
Version identifier
Serial number
Displaying the Cisco SCE Platform Inventory: FRUs Only, page 3-13
Displaying the Complete Cisco SCE Platform Inventory, page 3-14
, VID: V0 , SN: FOX105108X5
, VID: V0 , SN: CAT1122584N
, VID: V0 , SN: CAT1150G07F
, VID: V02, SN: JAE11517RMR
, VID: V02, SN: JAE11496E1P
How to Display the Cisco SCE Platform Inventory
Purpose
Displays the Cisco SCE platform inventory.
Cisco SCE 8000 10GBE Software Configuration Guide
3-13
Advertisement
Chapters
Table of Contents
