How To Display The Subscriber Database Counters - Cisco SCE 8000 10GBE Software Configuration Manual

Chapter 10 Managing Subscribers
•

How to Display the Subscriber Database Counters

From the SCE# prompt, type:
Command
show interface linecard 0 subscriber db counters Displays the subscriber database counters.
Monitoring the Subscriber Database: Example
The following example shows the output from this command.
SCE#show interface linecard 0 subscriber db counters
Current values:
===============
Subscribers: 249999 used out of 999999 max.
Introduced/Pulled subscribers: 999999.
Anonymous subscribers: 0.
Subscribers with mappings: 0 used out of 249999 max.
Single non-VPN IP mappings: 0.
Non-VPN IP Range mappings: 0.
IP Range over VPN mappings: 0.
Single IP over VPN mappings: 0.
VLAN based VPNs with subscribers: 0 used out of 4095.
Subscribers with open sessions: 243562.
Subscribers with TIR mappings: 0.
Sessions mapped to the default subscriber: 2.
Peak values:
============
Peak number of subscribers with mappings: 249999
Peak number occurred at: 15:54:06 UTC TUE May 13 2008
Peak number cleared at: 07:47:49 UTC SUN May 11 2008
Event counters:
===============
Subscriber introduced: 249999.
Subscriber pulled: 0.
Subscriber aged: 0.
Pull-request notifications sent: 0.
Pull-request by ID notifications sent: 0.
Subscriber pulled by ID: 0.
State notifications sent: 0.
Logout notifications sent: 0.
Subscriber mapping TIR contradictions: 0
OL-30621-02
Total number of aged subscribers
–
Total number of pull events
–
Number of traffic sessions currently assigned to the default subscriber
–
clear interface linecard 0 subscriber db counters
Purpose
.
Cisco SCE 8000 10GBE Software Configuration Guide
Monitoring Subscribers
10-21