How To Display Ipv6 Mappings To Dual Stack Static Subscriber - Cisco SCE 8000 10GBE Software Configuration Manual

Configuring the Static Subscribers

How to Display IPv6 Mappings to Dual Stack Static Subscriber

From the SCE(config )#> prompt, type:
Command
show part name party-name IPv6-ranges
How to Display Dual Stack Static Subscriber
From the SCE(config )#> prompt, type:
Command
show part name party-name
show interface LineCard 0 subscriber name
party-name
Cisco SCE 8000 10GBE Software Configuration Guide
8-14
Chapter 8
Purpose
Displays IPv6 mappings to dual stack static
subscriber.
Purpose
Displays dual stack static subscribers.
Displays dual stack static subscribers.
Configuring the Connection
OL-30621-02