How To Disable The Sntp Multicast Client - Cisco SCE 8000 10GBE Software Configuration Manual

Configuring SNTP

How to Disable the SNTP Multicast Client

From the SCE(config)# prompt, type:
Command
no sntp broadcast client
How to Enable the SNTP Unicast Client
Options
The following option is available:
•
From the SCE(config)# prompt, type:
Command
sntp server ip-address
Enabling SNTP Unicast Client: Example
The following example shows how to enable an SNTP server at IP address 128.182.58.100.
SCE(config)# sntp server 128.182.58.100
Disabling the SNTP Unicast Client
How to Disable the SNTP Unicast Client and Remove All Servers
From the SCE(config)# prompt, type:
Command
no sntp server all
Cisco SCE 8000 10GBE Software Configuration Guide
6-14
ip-address—The IP address of the SNTP unicast server.
Chapter 6
Purpose
Disables the SNTP multicast client. It will not
accept any broadcast time updates.
Purpose
Defines the SNTP unicast server so that SNTP
client is able to query that server.
Purpose
Removes all SNTP unicast servers, preventing
unicast SNTP query.
Global Configuration
OL-30621-02