Displaying Data Destination Configuration and Statistics
Displaying Data Destination Configuration and Statistics
•
•
The following commands can be used to display the RDR formatter configuration and statistics:
•
•
•
•
•
•
•
•
•
For a complete description of the other show rdr-formatter commands, see the
Command Reference
How to the Display the Current RDR Formatter Configuration
The system can display the complete data destination configuration, or just specific parameters.
From the SCE> prompt, type:
Command
show rdr-formatter
Cisco SCE 8000 10GBE Software Configuration Guide
9-18
How to the Display the Current RDR Formatter Configuration, page 9-18
How to the Display the Current RDR Formatter Statistics, page 9-19
show rdr-formatter
show rdr-formatter connection-status
show rdr-formatter counters
show rdr-formatter destination
show rdr-formatter enabled
show rdr-formatter forwarding-mode
show rdr-formatter rdr-mapping
show rdr-formatter statistics
show rdr-formatter protocol NetFlowV9 dscp
.
Chapter 9
Raw Data Formatting: The RDR Formatter and NetFlow Exporting
Purpose
Displays the current RDR formatter
configuration.
Cisco SCE8000 CLI
OL-30621-02