Table of Contents
Advertisement
Chapter 8
Configuring the Connection
Use the no form of this command with the linecard-aware-mode keyword to disable the linecard aware
mode without disabling link failure reflection itself.
How to Enable Linecard-Aware Mode
From the SCE(config if)# prompt, type:
Command
link failure-reflection on-all-ports
linecard-aware-mode
How to Disable Linecard-Aware Mode
From the SCE(config if)# prompt, type:
Command
no link failure-reflection linecard-aware-mode Disables linecard aware mode.
OL-30621-02
Purpose
Enables failure reflection to all ports with linecard
aware mode.
Purpose
Note that this command does not disable link
failure reflection on all ports.
Cisco SCE 8000 10GBE Software Configuration Guide
Link Failure Reflection
8-17
Advertisement
Chapters
Table of Contents
