The Do Command: Executing Commands Without Exiting - Cisco SCE 8000 10GBE Software Configuration Manual

Table of Contents

Advertisement

Chapter 2
Command-Line Interface
Table 2-5
Table 2-5
Authorization Level or
Command Mode
User Exec
Viewer
Privileged Exec
Global Configuration
MNG Interface
Configuration
(management)
Linecard Interface
Configuration
TenGigabitEthernet
Interface Configuration
(10GBE traffic)
Line Configuration

The do Command: Executing Commands Without Exiting

When you are in either the global configuration mode or any of the interface configuration modes, it is
possible to execute an EXEC mode command (such as a show command) or a privileged EXEC (such as
show running-config) without exiting to the relevant command mode. Use the do command for this
purpose.
OL-30621-02
Global Configuration command mode
From this command mode, the following Interface Command Modes can be accessed:
MNG Interface Configuration (management interface)
Linecard Interface Configuration
TenGigabitEthernet Interface Configuration (10GBE traffic interfaces)
Interface Range Configuration (range of traffic interfaces)
Line Configuration
summarizes how to navigate the CLI command hierarchy.
CLI Command Navigation Hierarchy
Use this command to access
Not applicable
enable 5
enable 10 or enable 15 (accesses root level)
configure
interface mng (0/1 | 0/2)
OR
interface gigabitethernet (1/1 | 1/2)
interface linecard 0
interface tengigabitethernet 3/<bay-number
(0-3)>/0
OR
interface range tengigabitethernet
3/<bay-range (any range between 0 and 3)>/0
line vty 0
Authorization and Command Mode Levels (Hierarchy)
Cisco SCE 8000 10GBE Software Configuration Guide
Use this command to
exit
logout or exit (exits the
current CLI session)
disable
disable
exit (exits to Privileged
Exec)
end (exits to User Exec)
exit (exits to Global
Configuration)
end (exits to User Exec)
exit (exits to Global
Configuration)
end (exits to User Exec)
exit (exits to Global
Configuration)
end (exits to User Exec)
exit (exits to Global
Configuration)
end (exits to User Exec)
2-7

Advertisement

Table of Contents
loading

Table of Contents