Simultaneous Upgrade Of Firmware And Application - Cisco SCE 8000 10GBE Software Configuration Manual

System Upgrades
Remove the force failure condition in that platform.
Step 7
After the former active Cisco SCE platform recovers and is ready to work, it may remain the standby or
Step 8
can be manually switched back to active.

Simultaneous Upgrade of Firmware and Application

In the standby Cisco SCE platform:
Step 1
a.
b.
c.
Force-failure in the active Cisco SCE platform.
Step 2
This makes the updated Cisco SCE platform the active one, and it begins to give the NEW service.
Repeat step 1 for the (now) standby Cisco SCE platform.
Step 3
Since this includes a reboot, it is not necessary to undo the force failure command.
Cisco SCE 8000 10GBE Software Configuration Guide
11-20
Uninstall the application.
Upgrade the firmware (this includes a reboot).
Install the new application.
Chapter 11 Redundancy and Failover
OL-30621-02