Table of Contents
Advertisement
Tunneling Protocols
Copy the running configuration to the startup configuration.
Step 4
SCE8000#> copy running-config startup-config
Reboot the Cisco SCE 8000 device.
Step 5
After Cisco SCE 8000 restarts, you can use the following configuration and show commands to
configure the 6to4 and 6rd tunnels:
•
•
•
Configuring the VLAN Environment
The Cisco SCE 8000 supports a maximum of 4096 VLAN tags.
Note
Use this command to configure the VLAN environment.
•
•
Cisco SCE 8000 10GBE Software Configuration Guide
7-16
configure interface linecard 0 IP-tunnel 6to4
configure interface linecard 0 no IP-tunnel 6to4
show interface linecard 0 IP-tunnel6to4
Options, page 7-17
Configuring the VLAN Environment: Example, page 7-17
Chapter 7
Configuring Line Interfaces
OL-30621-02
Advertisement
Chapters
Table of Contents
