Troubleshooting Tips
•
•
•
•
•
•
•
Display of System Event Log Events
To display the System Event Log (SEL) events, do the following:
In the Navigation pane, click the Server tab.
Step 1
From the Server tab, click System Event Log.
Step 2
Review the following information for each system event in the log.
Step 3
(Optional) From the Entries Per Page drop?down list, select the number of system events to display on
Step 4
each page.
(Optional) Click <Newer and Older> to move backward and forward through the pages of system events,
Step 5
or click <<Newest to move to the top of the list. By default, the newest system events are displayed at
the top if the list. Cisco CIMC.
Figure D-3
Display of Sensor Readings
To display the sensor readings, do the following:
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
D-4
mctool - Gets basic information on the State of the CIMC to USC management API.
network - See current network configuration and socket information.
obfl - Live obfl
messages - Live /var/log/messages file
alarms - What sensors are in alarm.
sensors - Current sensor readings from IPMI.
power - The current power state of the x86.
System Event Log
Appendix D
CDE280 and CDE285 Troubleshooting Tips