Monitoring The Management Interface - Cisco SCE 8000 10GBE Software Configuration Manual

Configuring the Management Ports

Monitoring the Management Interface

Use this command to display the following information for the management interface.
•
•
•
•
From the SCE# prompt, type:
Command
show mng interface Mng (0/1 | 0/2) [speed |
duplex | |ip address | auto-fail-over]
Cisco SCE 8000 10GBE Software Configuration Guide
5-10
speed
duplex
IP address
auto-failover configuration
Chapter 5 Configuring the Management Interface and Security
Purpose
Displays the specified GBE management
interface configuration for the specified interface.
If no option is specified, all management interface
information is displayed for the specified
interface.
OL-30621-02