Panasonic FP E Series User Manual page 323

(A: Available, N/A: Not available)
Register
No.
DT90156 MEWNET-W0
PC(PLC) link 0
status
DT90157
MEWNET-W0
DT90158
PC(PLC) link 1
Status
DT90159
(32k type only)
MEWNET-W0
DT90160
PLC link unit No.
MEWNET-W0
DT90161
PLC link error flag
DT90162 to
Not used
DT90169
DT90170
DT90171
DT90172
DT90173
DT90174
MEWNET-W0
DT90175 PLC link status
DT90176
DT90177
DT90178
DT90179
DT90180 to
Not used
DT90189
High-speed counter
DT90190 control flag monitor
for CH0
High-speed counter
DT90191 control flag monitor
for CH1
High-speed counter
DT90192 control flag monitor
for CH2
High-speed counter
DT90193 control flag monitor
for CH3
Name
Area used for measurement of receiving
interval.
Area used for measurement of sending
interval.
Area used for measurement of receiving
interval.
Area used for measurement of sending
interval.
Stores the unit No. of PLC link
Stores the error contents of PLC link
-
Duplicated destination for PLC inter-link
address
Counts how many times a token is lost.
Counts how many times two or more tokens
are detected.
Counts how many times a signal is lost.
No. of times underfined commands have been
received.
No. of times sum check errors have occurred
during reception.
No. of times format errors have occurred in
received data.
No. of times transmission errors have
occurred.
No. of times procedural errors have occurred.
No. of times overlapping parent units have
occurred.
-
This monitors the data specified in DT90052.
Descriptions
Read- Writ-
ing ing
A N/A
A N/A
A N/A
A N/A
N/A N/A
A N/A
N/A N/A
A N/A
12-31