Wiring - Panasonic FP E Series User Manual

7.3.2 Wiring

Accessory communication connector/Suitable wire
The communication cassette is supplied with a communication connector, which has a screw-type
terminal block.
Use the following items for wiring.
Accessory communication connector
If additional connectors are needed, use the communication connector manufactured by Phoenix
Contact.
Number of pins
5 pins
Suitable wire (twisted wire)
Number of wires
1
2
Use the above wires shielded.
It is recommended to ground the shielded part.
Pole terminals with compatible insulation sleeve
If you wish to use pole terminals, Phoenix Contact offers the following models.
Manufacturer
Phoenix Contact
Pressure welding tool for pole terminals
Manufacturer
Phoenix Contact
Phoenix Contact product ID
Model No.
MC1, 5/5-ST-3, 5
Size
AWG#28 to 16
AWG#28 to 18
Cross-sectional area
2
0.25 mm
2
0.50 mm
2
0.75 mm
2
1.00 mm
2
0.5 mm x 2
Phoenix Contact product ID
Model No.
CRIMPFOX UD6
Product No.
1840395
Cross-sectional area
2 2
0.08mm to 1.25 mm
2 2
0.08mm to 0.75 mm
Size
AWG#24
AWG#20
AWG#18
AWG#18
AWG#20 x 2 pcs
Product No.
1204436
Product number
AI 0, 25-6 YE
AI 0, 5-6 WH
AI 0, 75-6 GY
AI 1-6 RD
AI-TWIN 2x
0, 5-8 WH
7-15