Compactflash Cards; Compactflash Card System - Siemens SINUMERIK 828D Manual

2.9

CompactFlash Cards

2.9.1

CompactFlash card system

Overview
The PPU has two slots for CompactFlash cards:
● The slot for the user CompactFlash card is located at the front behind the protective flap.
● The slot for the System CompactFlash card with the system software is at the rear.
CompactFlash card with system software
The system CompactFlash card is shipped in a bootable condition. It is not supplied with the
PPU and must be ordered as a separate component.
The system CompactFlash card is essential for the operation of the PPU.
As well as the technology-specific system software for SINUMERIK 828D and the firmware
for SINAMICS, the system CompactFlash card also contains:
● Version info (serial number, version, type designation)
● License key: This means that the CompactFlash card can be inserted into another PPU
Note the following when using a system CompactFlash card:
● SINUMERIK CNC supports the file systems FAT16 and FAT32 for CompactFlash cards.
● Do not remove the memory card while it is being accessed. This can lead to damage of
● If you cannot use a memory card with the SINUMERIK, it is probably because the
● Insert the memory card carefully and the right way round into the memory card slot
PPU
Manual, 03/2013, 6FC5397-2DP40-3BA1
without having to change the licenses.
You may need to format the memory card if you want to use a memory card from another
device or if you want to ensure the compatibility of the memory card with the
SINUMERIK. However, formatting the memory card will permanently delete all data on it.
the memory card and the SINUMERIK as well as the data on the memory card.
memory card is not formatted for the control system (e.g. Ext3 Linux file system), the
memory card file system is faulty or it is the wrong type of memory card.
(observe indicators such as arrow or similar). This way you avoid mechanical damage to
the memory card or the device.
System description
2.9 CompactFlash Cards
29