Multi-Monitor Graphics Cards In Pc Stations - Siemens PCS 7 Installation Manual

Installing PC stations
5.5 Installation of drivers for PCS 7
Additional information
Section "Optional hardware components (Page 50)"
5.5.2.2

Multi-monitor graphics cards in PC Stations

If you want to connect multiple monitors to a computer, you should orient yourself using the
configurations in the
The following includes information about computers that have been released as a bundle PC
in PCS. 7
Released operating systems
You can find recommendations for this in the documentation
PCS 7- Readme (online).
Note
Product notes for the bundle PC
Read the product notes for the bundle PC. They include additional information on the drivers
for various components and operating systems.
Note
Installation of the drivers
Make sure that you do not use the hardware wizard to install the drivers. Start the setup by
means of the Windows Explorer.
Recommended multi-monitor graphic cards
You can find recommendations for this in the product overview
7; Released Modules.
Additional information
The recommended multi-monitor graphics cards are intended for use in OS stations.
If you use ES stations, for example, all displays will be shown correctly on monitor 1 only.
Note
Setup and configuration
You can find additional information on installing and configuring the multi-monitor graphics
cards approved for PCS7 in the WinCC Information System online help.
96
ST PCS 7 catalog .
Process Control System PCS 7;
Process Control System PCS
PCS 7 - PC Configuration (V8.2)
Installation Manual, 03/2016, A5E36200050-AB