Electronic Handwheel; Description - Siemens SINUMERIK 828D Manual

Connectable components

7.4 Electronic handwheel

7.4 Electronic handwheel
7.4.1

Description

Validity
Validity The description applies to the following electronic handwheel:
Designation
Handheld electronic handwheel
The handheld electronic handwheel is intended for use in conjunction with machines.
A magnetic bracket and spiral connection cable can be found on its enclosure. The magnetic
bracket (retaining magnet) means that the handwheel can be attached to metallic surfaces.
The electronic handheld handwheel is an incremental encoder that generates signals
according to how the manually operated wheel is rotated. The handwheel's magnetic
latching facility makes for an extremely precise incremental process. The axis selected via
the control can be positioned so that the axes are parallel. The handheld handwheel offers a
PPR count of 100 S/R.
①
②
③
Figure 7-30
For safe storage on non-magnetic surfaces, a holder (Page 149) is available.
144
Handwheel
Spiral connection cable
9-pin connector
View of electronic handheld handwheel
Interface
DC 5 V, RS 422
Manual, 03/2013, 6FC5397-2DP40-3BA1
Order No.
6FC9320-5DE02
PPU