Connecting; Connection - Siemens SINUMERIK 828D Manual

7.1.3

Connecting

7.1.3.1

Connection

Securing the cables
Two equivalent connections (Fast Ethernet) are available for establishing the PLC I/O
Interface communication network based on PROFINET.
Two cable ties are included in the scope of delivery. You use these to secure the Ethernet
cables on the cover plate at the rear of the machine control panel.
The Ethernet cables are not included in the scope of delivery. When connecting the machine
control panel to the SINUMERIK 828D, please use the preassembled SINAMICS DRIVE-
CLiQ signal cables; from a technical point of view, these are also suitable for use with
PROFINET.
NOTICE
Damage to cables
Make sure that all cables are routed so that they do not come into contact with chafing
edges.
See also
Ordering data (Page 27)
Interface overview
X10
X20
X21
X30
X31
X51 / X52 / X55
X53 / X54
X60 / X61
S1
S2
PPU
Manual, 03/2013, 6FC5397-2DP40-3BA1
Power supply interface
PLC I/O Interface port 1
PLC I/O Interface port 2
Interface for rotary switch feed override
Interface for rotary switch spindle override/EMERGENCY STOP (optional)
Interfaces for customer-specific inputs
Interfaces for customer-specific outputs
Reserved
Reserved
Switch for setting the MCP address
Connectable components
7.1 MCP 483C PN
103