Siemens SINUMERIK 828D Manual page 130

Connectable components
7.2 MCP 310C PN
Name
Override
Spindle rotary
switch
Override
Feed rotary switch
Key cap
Key cap
Cable set
Accessories pack (for delivery ex works):
Component
Keyset
Yellow backing plate
Removing the rotary switch
Note
For the machine control panel, use only electronic rotary switches.
Procedure:
1. Lever the cover
2. Remove the nut of collet
3. Remove the entire rotary knob
4. Remove the lock nut
130
Description
Spindle/rapid traverse override, electronic
rotary switch 1x16G, T=24, cap, knob,
pointer, spindle and rapid-traverse dials
Override feedrate / rapid traverse electronic
rotary switch 1x23G, T=32, cap, knob,
pointer, feedrate and rapid-traverse dials
Square, can be labeled by laser, 1 set of
90, ergo-gray and 20 each of red / green /
yellow / medium gray
Square, for inscription plates, 1 set of 90,
clear
For additional MCP control devices, length
500 mm
Description
Key caps for turning (labeled)
Ergo gray key caps (can be labeled)
Clear key caps (can be labeled)
for emergency stop
③ ②
off the rotary knob
①
with a wrench (width 10).
②
.
⑤
on the axis of the rotary switch
Quantity
1
1
1
1
60
(snap-on connection).
④
with a wrench (width 14).
Manual, 03/2013, 6FC5397-2DP40-3BA1
Order number
6FC5247–0AF12–1AA0
6FC5247–0AF13–1AA0
6FC5248–0AF12–0AA0
6FC5248–0AF21–0AA0
6FC5247-0AA35-0AA0
Quantity
9
30
30
1
PPU