Connecting - Siemens SINUMERIK 828D Manual

Connectable components
7.7 NX10.3
7.7.3

Connecting

Power supply X124
Connector designation:
Connector type:
Max. connectable cross-section:
Table 7- 82
Pin
1
2
3
4
Note
The two terminals "+" and "M" are jumpered in the connector and not in the device. This
ensures that the supply voltage is looped through.
Table 7- 83
Parameter
Voltage
Current consumption
Max. current via the bridges in the connector
Note
Current consumption
The current consumption increases by the current consumption of DRIVE-CLiQ and the
digital outputs.
208
Pin assignment for X124
Signal name
+ (Voltage input)
+ (Voltage input)
M (Voltage output)
M (Voltage output)
Technical data for X124
X124
Screw terminal 2
2.5 mm
2
Meaning
Electronics power supply
Electronics power supply
Ground
Ground
Value
24 V DC (20.4 V - 28.8 V)
max. 0.8 A (without load)
20 A at 55 °C
Manual, 03/2013, 6FC5397-2DP40-3BA1
PPU