Connectable components
7.6 PP 72/48D 2/2A PN
7.6.3.4
Specification of the digital inputs
Terminal assignment for the digital inputs
The following figure shows an example of the terminal assignment for the digital inputs on
connector X111. Connectors X222 and X333 are assigned analogously.
①
②
Figure 7-42
Characteristics:
● X222: DI 3.0 to 3.7 are connected as rapid inputs.
● The inputs have no signaling (status LEDs).
● The inputs are not isolated.
● It is not possible to connect a 2-wire BERO.
Power supply for digital inputs (X111, X222, X333: Pin 2):
● The internal power supply (P24OUT) is taken from the general power supply of module
● Alternatively, an external power supply can be connected if the load at the digital outputs
184
when using the internal power supply P24OUT
when using the external power supply P24OUT
Terminal assignment for the digital inputs
X1, pin 2 (P24).
becomes too high.
ext
Manual, 03/2013, 6FC5397-2DP40-3BA1
PPU