Mounting - Siemens SINUMERIK 828D Manual

Connectable components
7.7 NX10.3
7.7.2

Mounting

Designs
The NX10.3 is integrated into the SINAMICS drive line-up. For the preferred installation
sequence, the NX module should be mounted at the side of the Line Module.
NOTICE
Protection against overheating
The 80 mm ventilation spaces above and below the components must be observed.
Mounting aids
Figure 7-47
206
NX10.3 mounting aids
Manual, 03/2013, 6FC5397-2DP40-3BA1
PPU