Siemens PPU 26x.3 series Manual page 164

Connectable components
7.5 MCP 310C PN
Mounting slots for control devices
Warning of damage
Do not chip out the openings for mounting control devices
Key caps
All keys of the MCP 310C PN come with changeable key caps. Refer to the following table for
the additional replacement key caps provided for lathes in the accessories pack:
Key cap
You will find article numbers for the key caps in Chapter Spare parts and accessories
(Page 178).
164
WARNING
Symbol number
7027
7125
7126
7127
7128
⑥
; drill them to the required width.
Key cap Symbol number
7129
7130
7131
7132
Manual, 10/2015, 6FC5397-2DP40-5BA3
PPU and components