Nx10.3 / Nx15.3; Description - Siemens PPU 26x.3 series Manual

Connectable components

7.9 NX10.3 / NX15.3

7.9 NX10.3 / NX15.3
7.9.1

Description

Properties
Using the NX10.3 and NX15.3 modules, you can expand the performance of an axis group of
a SINUMERIK 828D CNC automation system. Each NX10.3 can control up to 3 additional
axes and each NX15.3 can control up to 6 additional axes.
Type plate
The NX module type plate contains the following information:
Figure 7-55
Note
You might need to access the information provided on the side-mounted type plate after the
equipment has been mounted. Since the type plate is located on the right-hand side of the
housing, which is the side typically used to connect to the SINAMICS S120 module, we
recommend that you make a note of the NX module serial number prior to assembly.
228
Type plate using the NX10.3 as example
PPU and components
Manual, 10/2015, 6FC5397-2DP40-5BA3