Siemens PPU 26x.3 series Manual page 189

● Adapter plate
To install the metal flange socket in the location for plastic flange sockets, an adapter plate
is available.
Figure 7-41
● Holder
The mini HHU can be stored in a screw-on holder; this enables safe storage even on non-
magnetic surfaces. The holder is secured with three M4 screws.
Figure 7-42
● Slide-in labels
You can replace the slide-in labels. To do this, you must release the six Torx screws at the
rear of the housing. The housing can now be taken apart. You can now withdraw the slide-
in labels out of the guide on the front panel and replace them.
Make sure that no connecting cables are pinched or crushed when reassembling.
PPU and components
Manual, 10/2015, 6FC5397-2DP40-5BA3
Dimension drawing of the adapter plate
Dimension drawing of the holder
Connectable components
7.7 Mini handheld unit
189