Connectable components
7.4 MCP 483C PN
7.4.1
Operator controls and display elements
Operator controls (front)
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
Figure 7-18
Mounting slots for control devices
The openings for installing control devices
PN" Fig. must not be broken out (risk of damage) but carefully drilled to the required width.
146
Emergency-Stop button
Installation locations for control devices (d = 16 mm)
Reset button
Program control
Operating modes, machine functions
User keys T1 to T15
Direction keys with rapid traverse override (R1 to R15)
Spindle control with override switch
Feed control with override switch
Keyswitch (four positions)
Position of control elements on MCP 483C PN
WARNING
②
in "Position of control elements of MCP483C
Manual, 10/2015, 6FC5397-2DP40-5BA3
PPU and components