Siemens PPU 26x.3 series Manual page 25

Key
Key
TFT color display
The TFT color display has a diagonal width of 10.4" with a resolution of 800 x 600 pixels. The
touch display has a diagonal width of 15.6" with a resolution of 1366 x 768 pixels. The softkeys
are arranged in an 8 + 8 layout; this makes the CNC easy to operate using only a few menu
levels.
Note
Pixel error acc. to DIN EN ISO 13406-2 Class II.
Function of the proximity sensor
The proximity sensor responds when persons approach and has the following range:
● The identification range is 0.8 ... 1 m.
● The opening angle is approximately 45 degrees.
The time until the screen is dimmed or darkened only expires as long as no operator actions
are performed or messages are output in the part program:
PPU and components
Manual, 10/2015, 6FC5397-2DP40-5BA3
Key combination
F10
F2
F3
F4
Key combination
↑ key
← key
<5> key on the number block
→ key
↓ key
2.3 Operator controls and display elements
Key Key combination
SHIFT + F10
F5
CTRL + F10
SHIFT + CTRL + F10
Key Key combination
"Home" key
"End" key
"Page up" key
"Page down" key
System description
25