Siemens PPU 26x.3 series Manual page 236

Connectable components
7.9 NX10.3 / NX15.3
Connection example
The digital inputs/outputs are connected appropriately during commissioning.
1)
2)
3)
Figure 7-59
See also
For the pin assignment of the DRIVE-CLiQ interfaces X100 - X103, please refer to Section
"DRIVE-CLiQ (Page 91)".
For further information on DC voltage and standards, please refer to Section "Power supply
connection (Page 75)".
236
Rapid inputs must be shielded.
Jumper open, electrical isolation for digital inputs (DI)
Can be parameterized as either input or output
Connection example for the NX10.3 / NX15.3
PPU and components
Manual, 10/2015, 6FC5397-2DP40-5BA3