Siemens PPU 26x.3 series Manual page 84

Interface description
6.5 Digital inputs/outputs
Pin
11
12
13
14
X252 pin assignment
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
NOTICE
Shielded signal cables for analog signals
To ensure safe, fault-free operation of the system, shielded cables with shield connection
should be used for the wiring of the analog outputs.
(See also: EMC compatibility (Page 37))
84
Signal name
M3 MEXT3
O3 DOUT3
O4 DOUT4
M3 MEXT3
Signal name
AO AOUT
AM AGND
IN9 DIN9
IN10 DIN10
IN11 DIN11
IN12 DIN12
M4 MEXT4
P3 P24EXT3
O9 DOUT9
O10 DOUT10
M3 MEXT3
O11 DOUT11
O12 DOUT12
M3 MEXT3
NC variable
$A_OUT[3]
$A_OUT[4]
NC variable Meaning
Analog output (voltage for analog spindle)
Analog ground
$A_IN[9] Digital NC input 9
$A_IN[10] Digital NC input 10
$A_IN[11] Digital NC input 11
$A_IN[12] Digital NC input 12
Ground for pins 3...6
+24 V power supply
$A_OUT[9] Digital NC output 9
$A_OUT[10] Digital NC output 10
Ground for pins 9, 10, 12, 13
--
● Without analog spindle:
Digital NC output 11
● With analog spindle:
Controller release for analog spindle (in
accordance with
MD30134 $MA_IS_UNIPOLAR_OUTPUT)
--
● Without analog spindle:
Digital NC output 12
● With analog spindle:
Travel direction of the analog spindle (in
accordance with
MD30134 $MA_IS_UNIPOLAR_OUTPUT)
Ground for pins 9, 10, 12, 13
Meaning
Ground for pins 9, 10, 12, 13
Digital NC output 3
Digital NC output 4
Ground for pins 9, 10, 12, 13
PPU and components
Manual, 10/2015, 6FC5397-2DP40-5BA3