Table of Contents
Advertisement
Default Parameters Section
The TACACS+ default parameters are user-defined defaults. The default settings are applied to newly defined TACACS+
servers. If default values are not defined, the system defaults are applied to the new TACACS+ new servers.
The Default Parameters section contains the following fields:
• Source IP Address -- The default device source IP address used for the TACACS+ session between the
device and the TACACS+ server.
• Key String (0-128 Characters) -- The default authentication and encryption key for TACACS+ communication
between the device and the TACACS+ server.
• Timeout for Reply (1-30) -- The default time that passes before the connection between the device and the
TACACS+ times out.
RADIUS
Remote Authorization Dial-In User Service (RADIUS) servers provide additional security for networks. RADIUS servers
provide a centralized authentication method for:
• Telnet Access
• Web Access
• Console to Device Access
To open RADIUS screen perform the folling:
1.
Click System -> Management Security -> RADIUS
2.
The RADIUS screen is displayed as in Figure 3-40.
The RADIUS Settings page is divided into the following sections:
• RADIUS Server Section
• Default Parameters Section
RADIUS Server Section
The RADIUS Server section contains the following fields:
• IP Address -- The list of Authentication Server IP addresses.
Figure 3-40 RADIUS Settings screen
43
Advertisement
Table of Contents
