Lacp System Status - Planet Networking & Communication IGS-6325 Series User Manual

The page includes the following fields:
Object

Port

LACP Enabled
 Timeout

Priority
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.

4.3.2.4 LACP System Status

This page provides a status overview of all LACP instances. The LACP Status Page display the current LACP aggregation
Groups and LACP Port status. The LACP System Status screen in
The page includes the following fields:
Object

Aggr ID

Partner System ID

Partner Key
Description
The switch port number.
Controls whether LACP is enabled on this switch port. LACP will form an
aggregation when 2 or more ports are connected to the same partner.
The Timeout controls the period between BPDU transmissions. Fast will transmit
LACP packets each second, while Slow will wait for 30 seconds before sending a
LACP packet.
The Priority controls the priority of the port. If the LACP partner wants to form a
larger group than is supported by this device then this parameter will control
which ports will be active and which ports will be in a backup role. Lower number
means greater priority.
Figure 4-3-2-6: LACP System Status Page Screenshot
Description
The Aggregation ID associated with this aggregation instance.
For LLAG the id is shown as 'isid:aggr-id' and for GLAGs as 'aggr-id'
The system ID (MAC address) of the aggregation partner.
The Key that the partner has assigned to this aggregation ID.
130
User's Manual of IGS-6325 series
Figure 4-3-2-6 appears.