Siemens Simatic ET 200SP Manual page 82

Activating / Deactivating counters for limit violations
Activating/deactivating of the counters for limit violations is only possible for module versions
with 20 bytes of output data.
Requirements: "Gate for limit value monitoring" was parameterized during configuration of
the module using STEP 7 or by writing the data record DS 128.
Select the counters for limit violations that you want to activate / deactivate in Control bytes 3
and 4.
Figure 9-3
Analog input module AI Energy Meter 480VAC/CT HF (6ES7134-6PA00-0CU0)
Manual, 07/2018, A5E42674880-AA
Activating / deactivating of the counters for limit violations
9.4 Measured variables for limit monitoring
Limit monitoring
81