Siemens Simatic ET 200SP Manual page 195

Module versions
C.1 Module version "2 I / 2 Q"
Assignment of the output user data
Via the output user data you control for all phases
● Resetting for all minimum values, maximum values, limits, operating hours counter and
energy meters.
● The counter gates for operating hours counter and energy counters.
Figure C-2
Note
For module version 2 I / 2 Q, a reset of the selected variables always acts on all measured
values/counter levels of the three phases.
• Reset energy counter: Acts on all active, reactive and apparent energies of all phases
• Reset operating hours counter: Acts on the counters of Phases 1 to 3
• Reset minimum / maximum values: Acts on the minimum and maximum value
calculations of Phases 1-3
• Reset all counters for limit violations: Acts on all 16 limit values.
194
Allocation of the control byte in the output user data (1 byte)
Analog input module AI Energy Meter 480VAC/CT HF (6ES7134-6PA00-0CU0)
Manual, 07/2018, A5E42674880-AA