Siemens Simatic ET 200SP Manual page 16

Properties
The module has the following technical properties:
● Measurement of electrical variables from single-phase, two-phase and three-phase
supply networks
● Max. nominal voltage between two line conductors 480 V AC
● Retentive storage of the counter values
● Use on frequency converters
● Recording of:
– Voltages
– Currents
– Phase angles
– Power
– Energy / electrical work
– Frequencies
– Minimum and maximum values with time stamp
– Power factors
– Operating hours
– Limits
– Power quality data for voltages and currents
The module supports the following functions:
Table 2- 1 Version dependencies of the functions
Function
Firmware update
Calibration in runtime
Identification data I&M0 to
I&M3
Reconfiguration in RUN
Diagnostic interrupts
Hardware interrupts
Note
The AI Energy Meter HF is released as of TIA Portal V15.0.0.2.
Analog input module AI Energy Meter 480VAC/CT HF (6ES7134-6PA00-0CU0)
Manual, 07/2018, A5E42674880-AA
HW FW version
ver-
sion
FS01 V6.0.0 or higher
FS01 V6.0.0 or higher
FS01 V6.0.0 or higher
FS01 V6.0.0 or higher
FS01 V6.0.0 or higher
FS01 V6.0.0 or higher
2.1 Properties of the AI Energy Meter HF
STEP 7
TIA Portal
V15 or higher with HSP0253
V15 or higher with HSP0253
V15 or higher with HSP0253
V15 or higher with HSP0253
V15 or higher with HSP0253
V15 or higher with HSP0253
Product overview
GSD file
PROFINET IO PROFIBUS DP
X ---
--- ---
X X
X X
X X
X ---
15