Siemens Simatic ET 200SP Manual page 198

Structure of output user data
The structure of the output user data is fixed and is the same at all the selectable user data
variants.
Via the output user data you control globally or phase-specifically
● Resetting for minimum values, maximum values, limits, operating hours counter and
energy meters.
● The counter gates for operating hours counter and energy counters.
● Gate for limits, minimum values and maximum values.
Table C- 4 Structure of output user data (20 bytes)
Byte Validity
0 Module
1 Module
2 Module
3 Module
4 Module
5 Module
6 Phase L1
7 Phase L1
8 Phase L2
9 Phase L2
10 Phase L3
11 Phase L3
12 Module and phas-
es L1, L2, L3
13 Reserved
14 Reserved
15 Reserved
16 Module and phas-
es L1, L2, L3
17 Reserved
18 Reserved
19 Reserved
Analog input module AI Energy Meter 480VAC/CT HF (6ES7134-6PA00-0CU0)
Manual, 07/2018, A5E42674880-AA
Designation Comment
User data vari- Control byte for switching the user data variant
ant
Control byte 1 Global resetting of values and counters, gate
Selection of the energy counter to be reset
Control byte 2
Control byte 3 Control of the limit monitoring of limit values 9 to 16
Control byte 4 Control of the limit monitoring of limit values 1 to 8
Reserved -
Control byte 6 Phase-specific resetting of values and counters, gate for Phase L1
Control byte 7
Control byte 8 Phase-specific resetting of values and counters, gate for Phase L2
Control byte 9
Control byte 10 Phase-specific resetting of values and counters, gate for Phase L3
Control byte 11
Control byte 12 Deletion of power quality analysis results or starting/stopping the
analysis of harmonics
Control byte 16 General reset (Page 41)
Module versions
C.2 Module version "32 I / 20 Q"
197