2: Delay Override - Honeywell H-S81-HS Operation Manual

Operations at Access Level 1
7.4.2 Delay Override
Press the button Delay override. This operation is allowed only if the Delayed Output LED is on,
and cancels any ongoing activation delay.
7.4.3 Overview of Zones with Ongoing Fire Alarm
In case of active alarms, a page is displayed as shown in the picture below.
This page allows to view:
• The total number of zones with active fire alarms
• The name and number of the first zone with active fire alarm
• The name and number of any other zone with active fire alarm
• The name and number of the last zone with active fire alarm.
Go to the central line using the arrow buttons and use the Scroll to view the chronological sequence
of the alarmed zones.
For viewing the list of alarmed devices, go to the relevant zone and press Enter.
H-S81-HS Installation & Operation Manual — P/N LS10114-000HI-E:A 2/24/2015
Figure 7.4 List of Zones with Active Fire Alarms
Figure 7.5 Details of Zones with Active Fire Alarms
Operating Instructions
133