Replacement Of Fuses - Honeywell H-S81-HS Operation Manual

Management of Faults

4.2.9 Replacement of Fuses

Fuses must be replaced exclusively with fuses of the same type and value. See the table below for
fuse types.
Location
Fuse for PU-A0005-1 power supply unit
Fuse for PU-A0008-1 power supply unit
Battery fuse disconnect switch for S81-PU0001
Battery fuse disconnect switch for S81-PU-0002
4.2.10 Repair of a Faulty Module
The repair of a faulty module must be carried out by the manufacturer only. Send faulty modules to
Honeywell for repair, together with a brief description of the type of fault.
4.2.11 Customer Service and Training
The customer service of Honeywell can support the final user during design, development and test-
ing of H-S81-HS-type systems. Furthermore, specific training courses on this product can be orga-
nized on request at our premises. For any technical information, please use the following contacts:
H-S81-HS Installation & Operation Manual — P/N LS10114-000HI-E:A 2/24/2015
Honeywell Industrial Training Center
Ph. 713-577-1510
E-mail: honeywellsafetytraining@honeywell.com
Start-Up and Fault Management
Type Value
5x20 ultra fast glass fuse T6,3A H250V
5x20 ultra fast glass fuse T10A H250V
10x38 fuse link 20A-G
10x38 fuse link 50A-G
117