Parts of the H-S81-HS System
Configuration
By using the ProS81 configuration program, the following parameters can be set for each virtual
channel:
Function
Operating mode
Activates/alarmed condition
Type of indication
Operating mode
Output type
Enable/Disable status export to Hosts
Enable/Disable commands from Hosts
on the channel
The following parameters can be set for each module through the configuration program or directly
on the control panel in the operator cycle, access level 3:
Field Connections
This module does not feature any field connections, and therefore requires no terminations.
70
Type
Sensors
Sensors
Sensors
Actuators
Actuators
Sensors/Actuators
Sensors/Actuators
Parameter
Release delay time
Reset inhibit time
Hold operating mode
Figure 2.34 Fire Extinguishing System
H-S81-HS Installation & Operation Manual — P/N LS10114-000HI-E:A 2/24/2015
Mode
NO
Non Latching
Fire, Supervisory, Gas, Trouble, Hidden, Buzzer Only
Continuous-Normally De-energized
Normal
No, TCP1, TCP2, RS232
No, TCP1, TCP2, RS232
Mode
0-60 seconds
1-30 minutes
Mode-A / Mode-B
I/O modules