Jog - Siemens SINAMICS S120 Function Manual

Hide thumbs Also See for SINAMICS S120:

Table of Contents

● Via the analog inputs of the following exemplary components:

Jog

This function can be selected via digital inputs or via a field bus (e.g. PROFIBUS). The

setpoint is, therefore, predefined via p1058[D] and p1059[D].

When a jog signal is present, the motor is accelerated to the jog setpoint with the

acceleration ramp of the ramp-function generator (referred to the maximum speed p1082;

see diagram "Function chart: jog 1 and jog 2"). After the jog signal has been deselected, the

motor is decelerated via the set ramp of the ramp-function generator.

The "Jog" function is not PROFIdrive-compliant!

Drive functions

Function Manual, (FH1), 10/2008, 6SL3097-2AB00-0BP5

– Setpoint via PROFIBUS, for example

– e.g. Terminal Board 30 (TB30)

– e.g. Terminal Module 31 (TM31)

– e.g. Terminal Module 41 (TM41)

Function chart: jog and OFF1

Extended setpoint channel