Setting The Reinforcement Tape Feed Into The Tulle Foot - DURKOPP ADLER 610-10 Service Instructions Manual

Individual settings

4.19.2 Setting the reinforcement tape feed into the tulle foot

Fig. 79: Setting the reinforcement tape feed into the tulle foot (1)
(1) - Reinforcement tape
Proper Setting
The position of the reinforcement tape (1) is guided by the tulle foot (2).
The reinforcement tape (1) should be fed centrally into the tulle foot (2).
Fig. 80: Setting the reinforcement tape feed into the tulle foot (2)
(1) - Screws
To set the reinforcement tape feed into the tulle foot:
1. Loosen the screws (1) and move the tulle foot sideways.
2. Tighten the screws (1).
Service Instructions 610-10/630-10 - 01.0 - 12/2016
①
②
(2) - Tulle foot
①
(2) - Screws
②
85