Thread Trimmer; Speed - DURKOPP ADLER 610-10 Service Instructions Manual

5.4.2 Thread Trimmer

In the Thread Trimmer subitem, you can define the settings for cutting
the thread.
Parameters in the Thread Trimmer subitem
Entry

Speed

Thread Tension
At Needle
Thread Tension
At Hook
Turn Back
5.4.3 Speed
In the Speed subitem, you can define the speed in certain situations.
Parameters in the Speed subitem
Entry
Maximum Speed
Positioning Speed
Softstart Speed
Number Stitches
Softstart
98
Meaning
Speed when thread is cut
-1
in min
Needle thread tension when
cutting the thread in %
Looper thread tension when
cutting the thread in %
Meaning
Maximum speed when fully
-1
pressing the pedal in min
Speed when positioning
-1
in min
-1
Speed on soft start in min
Number of stitches on soft
start
Service Instructions 610-10/630-10 - 01.0 - 12/2016
Programming
Possible value
Preset value
range
50 – 250 180
0 – 50 5
1 – 5 2
0 - 1 1
Possible value
Preset value
range
500 – 4000 4000
10 – 700 400
10 – 1000 500
0 – 10 1