Setting The Thread Take-Up Disk - DURKOPP ADLER 610-10 Service Instructions Manual

4.16 Setting the thread take-up disk

Fig. 65: Setting the thread take-up disk (1)
(1) - Thread take-up disk
Proper setting
When the machine is locked in place at position E, the thread take-up disk (1)
should be 5 mm above the carrier plate (2).
Disturbance
• Missing stitches
• Thread breakage
Cover
Disassembling the covers on the base plate ( p. 13)
76
Individual settings
(2) - Carrier plate
Service Instructions 610-10/630-10 - 01.0 - 12/2016
①
②