Working Basis; Laying The Cables; Disassembling The Covers - DURKOPP ADLER 610-10 Service Instructions Manual

Working basis

3

3.1 Laying the cables

Ensure that all cables are laid in the machine such that the function of
moving parts is not hampered.
To lay the cables:
1. Lay any cable that is too long neatly in proper cable snakes.
2. Bind together the cable loops with cable ties.
3. Cut off any overlapping cable ties.

3.2 Disassembling the covers

For many types of setting work, you will have to disassemble the machine
covers first in order to access the components.
This chapter describes how to disassemble and then assemble the individ-
ual covers. The text for the relevant setting operations then only mentions
which of the covers must be disassembled.
Service Instructions 610-10/630-10 - 01.0 - 12/2016
Working basis
NOTICE
Property damage and malfunctions can be caused by laying the
cables incorrectly!
Excess cables can impair the functioning of moving machine parts.
This affects the sewing process and can result in damage to the
machine.
Lay excess cable as described.
If possible, bind the snakes to fixed parts.
Important
The cables must be fixed in place!
13