Table of Contents
Advertisement
17.8 Setting the parameter Setting the gap between the foot
Here the gap between the foot and the feed dog can be adjusted.
1. Call up the Service > FootZeroHeight menu item.
2. Set the value within the range 0 – 100.
3. Press the OK button to confirm the change.
4. Check the gap between the foot and the feed dog.
5. If the gap between the foot and the feed dog is not correct, adjust the
17.9 Counter submenu
Use this menu item to view the readings of the various counters. They are
intended for information only – no settings can be made.
Abbreviation
P.C.
P.C.D.
S.C.
B.C.
17.10 Reset data submenu
Use this submenu to reset the data of the machine. Various settings can
be made for resetting the data. The options are explained in more detail in
the table.
Access is possible only by entering the password 25483 again.
The reset is carried out immediately after selecting a subitem with the
arrow buttons and then pressing OK. There is no further query, and there
is also no message stating that the reset was performed.
To reset the data:
1. Select the Reset parameter.
2. Press the OK button to confirm the selection.
96
and the feed dog (
value accordingly.
Meaning
Piece Counter
The number of sewing items that the machine has sewn so far.
Piece Counter Daily
The number of sewing items that the machine has sewn since the last
reset.
The number of stitches that the machine has sewn so far.
The number of stitches that have been sewn with the bobbin since the
last reset.
NOTICE
Property damage may occur!
Data and machine settings may be irretrievably lost.
Consider BEFORE the reset exactly which data need to be deleted.
)
FootZeroHeight
Service Instructions 878-M PREMIUM - 03.0 - 10/2019
Programming
Advertisement
Table of Contents
