Decommissioning - DURKOPP ADLER 610-10 Service Instructions Manual

Decommissioning

7
You need to perform a number of activities if the machine is to be shut
down for a longer period of time or completely decommissioned.
To decommission the machine:
1. Switch off the machine.
2. Unplug the power plug.
3. If applicable, disconnect the machine from the compressed air supply.
4. Remove residual oil from the oil pan using a cloth.
5. Cover the control panel to protect it from soiling.
6. Cover the control to protect it from soiling.
7. Cover the entire machine if possible to protect it from contamination
Service Instructions 610-10/630-10 - 01.0 - 12/2016
Decommissioning
WARNING
Risk of injury from a lack of care!
Serious injuries may occur.
ONLY clean the machine when it is switched off.
Allow ONLY trained personnel to disconnect the
machine.
CAUTION
Skin damage from contact with oil!
Oil can cause a rash if it comes into contact with
skin.
Avoid skin contact with residual oil.
and damage.
119